Table of Contents
The search for the right thermometer and humidity gauge tool must have brought you to this page today.
It’s only natural to search for the best thermometer for bearded Dragon since you own one in captivity as a pet. The importance of good humidity in its enclosure cannot be over emphasized.
The recommended humidity level should be kept at around 35 to 45%. This level of humidity is identical to the wilderness of Australia.
Note: These reptiles came from dry, semi-desert areas in Australia. Most times, they lie under the heat of the sun during the day, and at night they’ll look for a suitable place to hide and sleep.
Beardies need heat, but how will you know if their terrarium’s humidity isn’t too high or too low? The answer is by using a thermometer and what better than a best thermometer for Bearded Dragon Pets?
Best Thermometer for Bearded Dragons: Raytek Non-Contact Gun
Topping the list of best thermometer for Bearded dragon is the Raytek Non-Contact Thermometer Gun. Although a bit pricey, this temperature gun makes checking the temperature of your dragon’s basking spot, cool side of the enclosure, and virtually anywhere else a total breeze!
Want to know the best part?
Unlike cheaper alternatives, this Raytek temperature readings are 98% accurate most of the time. Thus, ensuring you’ll never risk throwing the temps in your beardie’s habitat off.
Plus, with this gun, you won’t have to wait around like you do with normal probe thermometers (some of which take up to 45 minutes!) to get a final temperature reading.
That being daid, let’s look at other great reptile thermometer and humidity gauge.
Other Great Options for Bearded Dragon Thermometers
Do you need a thermometer for your reptile tank? Hell Yeah!. In fact, it’s advised to use at least two thermometers. One on the heated area and one on the cooler area of the terrarium.
This ensures that your beardie gets enough basking heat, while also making sure that the terrarium’s temperature doesn’t get too high.
Here are ten of the best thermometers available in online stores:
Zoo Med Digital Thermometer
This is a digital thermometer great for your reptile’s terrarium. The digital readout of this thermometer can be set to Celsius or Fahrenheut, you can switch to your desired setting whenever you want.
The package comes with batteries, so you need not worry about getting batteries.
When you install it in your pet’s terrarium, ensure your beardie wouldn’t chew or get entangled in the wires.
This probe can be submerged into the water, however, the LCD readout must always remain dry. This thermometer could read and sense temperatures from 10 to 140 degrees Fahrenheit.
Zoo Med Digital Thermometer Humidity Gauge
You can save space and time when you take care of your bearded dragon by using this thermometer. It is a mixture of a humidity gauge and a digital thermometer.
You can use it in terrariums, incubators, and other animal applications. The package already includes batteries and ready to be used after purchase.
The remote probes are independent and could measure the heat and humidity levels of the tank in various locations.
This is a waterproof probe that can be used in air and when submerged in water, but, the digital display should remain dry. You can slide the switch of Celsius or Fahrenheit to your desired setting.
Exo Terra Digital Thermometer and Hygromete
Exo Terra’s Thermometer and Hygrometer is a combined precision device. This probe is equipped with a remote that is combined with a sensor, this is to give correct humidity and temperature indication.
This device has a programmable memory setting that can be set to minimum or maximum, it can be controlled with only a single button.
This is why we gave it #3 spot on our ratings of the best thermometer for bearded dragon.
It is easy to use and durable, this thermometer can be installed on your beardie’s terrarium either by a loop and hoop fastener or by sliding it into position on top of Exo Terra’s linear fluorescent top or compact top.
Exo Terra Digital Thermometer
Exo Terra’s digital thermometer is remote sensor equipped for a durable and accurate measurement. It has a minimum/maximum memory setting that is programmable and can be controlled with a single button.
Using the suction up, you can hold the thermometer’s sensor in place.
This device can be mounted in your beardie’s terrarium in three ways, it could be with a Velcro, screw, , or by sliding it into a compact top.
With a thermometer like this, you can maintain a proper temperature for your pet reptile, and as well as its health and its well being.
Zoo Med Digital Infrared Thermometer
This is a new pocket-sized infrared thermometer by Zoo Med. This infrared thermometer measures instantly your bearded dragon’s terrarium with just a click of a button.
This is a great tool for reptile keepers, like you, to monitor the terrarium’s basking sites, shelters, thermal gradients, hibernation and incubation temperatures, and more.
If you don’t want a thermometer that is mountable, then this is the best thermometer for you. It can read temperatures in both Celsius and Fahrenheit and could read for up to 230F or 110C.
The probe also contains a minimum/maximum function, it would allow you to monitor the fluctuations of your beardie’s terrarium over time.
Omem Digital Retile Thermometer
This is another top recommended one amongst the best thermometer for bearded dragon you’d find online.
This thermometer comes with a small digital LCD display. This device is a combination of Hygrometer and Thermometer, which can provide accurate temperature levels.
The thermometer doesn’t have any buttons, so how will you change the Fahrenheit to Celsius, and vice versa?
You can achieve this by clicking the hole at the back of the Omem thermometer with a metal stick. Make sure that the metal stick would fit into the hole to change the setting. Its measuring temperature could range from up to 50 to 70C or 122 to 158F.
Make sure you always replace the batteries with new ones as soon as possible to avoid incorrect readings.
Pet Magasin Digital Thermometer
Whether you use this thermometer for a bearded dragon or pet fish, this thermometer will still be perfect for monitoring the tank’s temperature.
Having a proper temperature in their terrarium is very important for the sake of their well being.
As expected, this is a combination of hygrometer and thermometer. It could both monitor the tank’s humidity and temperature level, aside from that, it is very affordable and simple to use.
The temperature can be displayed either in Fahrenheit or in Celsius.
Zoo Med Dual Analog Thermometer and Humidity Gauge
If you have a thing for analog thermometer, then this is the best analog thermometer for you. Unlike digital thermometers, this thermometer doesn’t need any batteries. You’ll just stick it onto your beardie’s terrarium and you are done.
Simple as ABC!
This thermometer can both monitor the humidity level and temperature of your pet’s tank. Analog type thermometers could still provide accurate information.
It will accurately check the temperature and humidity levels of your beardie’s terrarium, like digital thermometers.
This analog thermometer has a Velcro at the back, it will enable you to easily stick and remove it from your beardie’s tank for cleaning or relocation.
Exo Terra Analog Thermometer
Here is another example of a great analog thermometer for your bearded dragon’s terrarium that has made it into the top listing of best thermometer for bearded Dragon!
Exo Terra’s thermometer could accurately monitor the temperature level of your beardie’s tank. It is made with an option of monitoring the temperature levels in Celsius or in Fahrenheit.
It is very easy to install and read in the terrarium. Since analog thermometers don’t need batteries, this could last for a very long time. Maintaining a good temperature level for your beardie is core for their health and well-being, so make sure that their terrarium has enough temperature.
Aquarium Masters Temp Digital Thermometer
Here is a digital thermometer that is good for both terrariums and aquariums. This thermometer has a strong suction cup that can be mounted either on the inside or outside of your beardie’s terrarium.
The external sensor can be mounted on wet and dry areas, however, the LCD display should always be dry.
This is very simple to use and can immediately switch the temperature setting between Fahrenheit and Celsius.
To turn on the thermometer, just press and hold the power button for a few secs. To turn it off, press and the power button for at least five seconds. The package consists of batteries making it ready to use upon purchase.
These are the best thermometers available that you can buy in Amazon for your bearded dragon’s enclosure. Make sure that you choose a reliable thermometer that would meet your needs (current and future), as well as your bearded dragon’s needs.
When Setting Up and Installing the Heating Equipment in your Beardie’s Terrarium
Now that you have picked one of the best thermometers for bearded dragon and are about to install a heating device in your bearded dragon’s terrarium, proof check to ensure that the enclosure is not made fully with glass or plastic covers.
This type of enclosures could trap the humidity and air within the reptile’s terrarium, it could also create a stale and stagnate air.
This could cause problems on your bearded dragon’s respiratory system and could lead to very high humidity levels.
But if using a tank terrarium could not be avoided, then make sure that it is mounted with a thermometer, this way you could always monitor the temperature of your bearded dragon’s terrarium, and immediately adjust it on the required amount of heat.
Your Pets Home Ventilation
Aside selecting and using the best thermometer for beaded Dragon on the terrarium’s temperature, you should also make sure that the enclosure has good ventilation. This is the best way to reduce the humidity level of the enclosure.
Use screen covers that are made of mesh wire to provide a good air flow, this could also help dissipate the noxious gases that are associated in your reptile’s respiration, and the defecation inside the terrarium.
Also, a good air flow provides your bearded dragon with enough, fresh supply of oxygen making it live more comfortably in its terrarium.
Three Types of Thermometers
Currently, there are three types of thermometers available in the market, and these are:
Digital Thermometer
The temperature level will be shown on a little screen in numbers. Thermometers like these could only work when there are batteries in it.
Analog Thermometer
These thermometers are already made with numbers on it that shows the degrees of both Celsius and Fahrenheit. It doesn’t need any batteries.
Chemical Thermometer
Thermometers like these are made with a chemical substance, this is to help indicate the temperature on an accumulative scale. An example of a chemical that is used is Mercury.
The Best Infrared Thermometer for Bearded Dragons
The best infrared reptile thermometer is without no competitor, the Zoo Med Repti Temp Digital Infrared Thermometer because it’s just too easy to use, extremely accurate, compact, and can measure the temperature of virtually anything in your beardie’s tank… including him!
With very high reviews on Amazon, this infrared thermometer is definitely the fix for your pet on the go.
The Best Hygrometer for Bearded Dragon Enclosure [Measure Humidity]
To ascertain your BD comfortability, you’re going to want to aim for a humidity level ideally around 40%, and certainly no lower than 30% nor higher than 50%. This will help him feel at home in his enclosure and keep them from becoming sick.
Below are some of the best hygrometer for bearded dragon you’d find online.
SensorPush’s Wireless Thermometer and Hygrometer
One of the most high-tech, compact, and reliable hygrometers is this one from wireless one from SensorPush, that can sit discreetly in your bearded dragon’s enclosure.
The hygrometer connects to your Android or IPhone and feeds you updates on both the humidity and temperature levels in REAL TIME! Pretty cool if you ask me.
It also seamlessly tracks both measurements throughout the course of the day so you can stay on top of both humidity and temperature at all times.
And while this product is a cost more than the usual, it’s a great investment for anyone super serious about ensuring their bearded dragon has a comfortable environment to call home.
Exo Terra Thermometer/Hygrometer Combination Reader
If your budget is lesser than the SensorPush hygrometer, fear not. The one mentioned above from Exo Terra is a great alternative for much less. Just be aware, that this one is not wireless and will require some shifting of the probe as well as a waiting period to get both accurate temperature and humidity readings. It’s less convenient than Sensorpush’s option, but cheaper.
Where to Place the Thermometer in a Bearded Dragon Enclosure
Unless you bought a temp gun, you’re going to need to move the probe on your thermometer around a bit to get all the accurate temperatures of your bearded dragon’s enclosure.
For example, you’ll need to place the probe on their basking spot for that temperature, as well as on the cool side of the enclosure for that temperature as well.
Remember, the probe for most thermometers will need a solid 45 minutes or so to get an accurate reading so just leave it be.
Your bearded dragon will likely not pay it any attention and if they do? Just give the some toy activities while you get their enclosure’s temperatures figured out.
How is a Thermometer Used for Bearded Dragons?
Using a thermometer for a bearded dragon’s terrarium has two primary benefits. First, it is used during the early phase setup to check a good temperature, and so that the heating equipment could be permanently mounted in the terrarium.
And secondly, the thermometers are used to accurately monitor the temperature of the bearded dragon’s environment.
This is of course by mounting the thermometer in one area where the temperature should be monitored. In this way, if there is a sudden increase or decrease of the terrarium’s temperature, it could be immediately be identified and corrected as soon as the change happens.
The Required Level of Temperature for Bearded Dragons
Thermometers for bearded dragons function is to read the right temperature range for beardies.
The right and appropriate amount of heat for bearded dragons should be around 40 degrees Celsius or 104 degrees Fahrenheit, and with a temperature gradient for about 24 to 34 degrees Celsius or 75 to 93 degrees Fahrenheit… Anything higher than this is unusual
How to Choose a Good Thermometer?
When picking a thermometer, you should also check out its quality aside the price. You should pick a good size, make sure that you pick a small one.
You might also consider how reliable it is, its design, and durability.
Aside from monitoring the terrarium’s temperature, you should also definitely consider the durability of the thermometer. It would be great if it would last for at least 5 years or so, rather than lasting for a year or a few months.
And of course, a good design. If you are thinking about letting your beardie’s thermometer last for a long time, then make sure that the design of the probe would add a good decorative design on the enclosure.
Your beardie appreciates a good taste!
You won’t want a thermometer that is looking out of place on the terrarium, so make sure that you buy a good one.
Bearded Dragon Lighting Guide
In any tank, it’s important you have a heat lamp (AKA basking bulb), a UVB bulb, and a ceramic heat emitter (if it gets colder than 65 degrees Fahrenheit in your home at night) for your bearded dragon lighting setup. This is really all you need.
You’ll also need to make sure that whatever bulb you use for your heat lamp emits white light… NOT colors. Regular household bulbs or halogen flood lights work fine for this! However, when it comes to the UVB bulb, the choices of what to use are way more limited.
Conclusion
Lizards like the bearded dragons, need enough humidity level in their terrariums, and to make sure that the heat coming from the heating equipment isn’t set too high or too low for your beardie’s comfort, you should use a reliable thermometer to always check the temperatures level.
This is why we have written this review guide of the best Thermometer for bearded dragon. Plus, you could use two thermometers on your pet’s tank to check the temperature on the heated area of the tank, and as well as the cooled part. If you have used a digital thermometer, then make sure that the wires aren’t accessible to your beardie so they don’t chew them.
Leave a Reply